Pipe Elbow
Pipe Tee
Pipe Reducer
Pipe Cap
Pipe Bend
Seamless Steel Pipe
ERW Steel Pipe
Weld Neck Flange
Slip On Flange
Blind Flange
Forged fitting


· The characteristics of the Pipe fitting stainless steel reducer
· The forming of seamless steel pipe
· Analysis of main causes causing the decline of bend quality
· Manufacturing process of pipe tee
· Brief introduction of forged fitting
· The Stainless Steel Welding Ellipsoidal Head Pipe Cap heat treatment method
· Processing method of Seamless Steel Pipe Elbow


Location:HOME  »  NEWS
How to judge the quality of stainless steel pipe fittings bend?
Source :本站   Time:11/7/2017 9:53:08 PM   hit:

  Now the stainless steel seamless pipe fittings bend also have a lot of products, in the face of such a situation we want to identify the true and false stainless steel fittings bend, and now you can use some chemical syrup to identify some of the characteristics of stainless steel, and thus to identify the stainless steel pipe fittings bend are also good or bad Methods as below:

  1, we all know that stainless steel pipe has a strong magnetic, non-magnetic or weak magnetic some of the characteristics of stainless steel is non-magnetic steel, but after a large pressure cold processing will have a mild magnetic; pure chrome steel and low alloy steel has a strong Magnetic steel.

  2, another significant feature of stainless steel is the most concentrated nitric acid and dilute nitric acid has a certain degree of corrosion resistance, can be very intuitive to distinguish between stainless steel and other metals.

  3, sulfuric acid test sulfuric acid immersion test can 302 and 304 and 316 and 317 stainless steel pipe to distinguish. The trimming of the sample should be finely ground and then washed and passivated for half an hour in nitric acid at a concentration of 20 to 30% and at a temperature of 60 to 66 ° C.

  4, in addition to the use of nitric acid can also be used to distinguish between ordinary copper carbon and all the ordinary stainless steel. As long as the concentration of 5 to 10% of the copper sulfate solution can clearly see the difference between the two, ordinary carbon steel in the copper sulfate solution will form a surface copper, and then the surface of stainless steel is not There are other reactions, of course, before doing this experiment to clean up the carbon steel, to remove grease or a variety of impurities, and polished with a soft grinding a small area.

         Previous :Maintenance of blind flange production equipment
               Next:What’s the Technical Requirement of Weld Neck Flanges?
Friendly Links: carbon steel pipe fitting    steel shots    pipe fittings    carbon steel pipe fittings factory    Seamless Steel Pipe    steel pipe    valve    Butt welded elbow    shengtian pipe fitting    pipe fittings manufacturers    Butt weld pipe fitting    A234 wpb pipe fitting    steel seamless pip    accesorios de tubería    conexões    flanges    ANSI B16.9 weld neck flange     Фитинг    Screwed Fittings    steel flange    ERW pipes    manhole covers    steel grit    reeqlink   
Copyright ©Hebei Shengtian Pipe fittings Group Co.,Ltd.   
       Copyright ©Hebei Shengtian Pipe-fitting Group Co.,Ltd.     Email : sale@stpipefitting.cn 
 Add : Xiwang New District, Mengcun County,Hebei Province,ChinaSupport:boyikeji