Pipe Elbow
Pipe Tee
Pipe Reducer
Pipe Cap
Pipe Bend
Seamless Steel Pipe
ERW Steel Pipe
Weld Neck Flange
Slip On Flange
Blind Flange
Forged fitting


· The characteristics of the Pipe fitting stainless steel reducer
· The forming of seamless steel pipe
· Analysis of main causes causing the decline of bend quality
· Manufacturing process of pipe tee
· Brief introduction of forged fitting
· The Stainless Steel Welding Ellipsoidal Head Pipe Cap heat treatment method
· Processing method of Seamless Steel Pipe Elbow


Location:HOME  »  NEWS
What’s the Technical Requirement of Weld Neck Flanges?
Source :本站   Time:11/16/2017 10:14:03 PM   hit:

  The grade of weld neck flanges its technical requirement should meet with JB4726-4728.

  Alloy steel with nominal pressure PN 0.25MP-1.0Mpa and austenitic stainless steel forge pieces allow to adopt first stage forge piece.

  Except following regulations, forge piece whose nominal pressure PN is 1.6MPa-6.3 Mpa should accord with the requirement of second or above second forge piece.

  Anyone accords with one of the following condition should meet with the requirement of third stage forge peices:

  1) nominal pressure PN≥10.0MPa flange with forging

  2) nominal pressure PN>4.0MPa chromium-molybdenum steel with forging

  3) nominal pressure PN>1.6Mpa and working temperature ≤-20℃ ferrite steel forgings.

  Weld neck flanges normally manufactured by forge piece or forge rolling. When adopt steel plate or profile plate to manufacture, it must be accords with the following requirements:

  1. ANSI Class150 Forged Alloy Steel Weld Neck Flanges should be ultrasonic flaw detection, no delamination defect; 2. It should be rolled along the direction of steel cutting into strips, bending to weld into rings, and the surface of the steel to form a ring of cylindrical surface. Not to use steel plate directly machined into the neck weld neck flange; 3. The butt weld of the ring shall be fully fused through the weld; 4, Ring butt weld should be welded after heat treatment, and for 100%-ray or ultrasonic flaw detection, and Ray flaw detection meets JB4730 level II requirements, ultrasonic flaw detection meets JB4730 level I requirements.

  If you insrtested in our products,you can send email to us.email:sale@stpipefitting.cn

         Previous :How to judge the quality of stainless steel pipe fittings bend?
               Next:Stainless steel welded pipe fittings reducer have five conventional methods
Friendly Links: carbon steel pipe fitting    steel shots    pipe fittings    carbon steel pipe fittings factory    Seamless Steel Pipe    steel pipe    valve    Butt welded elbow    shengtian pipe fitting    pipe fittings manufacturers    Butt weld pipe fitting    A234 wpb pipe fitting    steel seamless pip    accesorios de tubería    conexões    flanges    ANSI B16.9 weld neck flange     Фитинг    Screwed Fittings    steel flange    ERW pipes    manhole covers    steel grit    reeqlink   
Copyright ©Hebei Shengtian Pipe fittings Group Co.,Ltd.   
       Copyright ©Hebei Shengtian Pipe-fitting Group Co.,Ltd.     Email : sale@stpipefitting.cn 
 Add : Xiwang New District, Mengcun County,Hebei Province,ChinaSupport:boyikeji