Pipe Elbow
Pipe Tee
Pipe Reducer
Pipe Cap
Pipe Bend
Seamless Steel Pipe
ERW Steel Pipe
Weld Neck Flange
Slip On Flange
Blind Flange
Forged fitting


· The characteristics of the Pipe fitting stainless steel reducer
· The forming of seamless steel pipe
· Analysis of main causes causing the decline of bend quality
· Manufacturing process of pipe tee
· Brief introduction of forged fitting
· The Stainless Steel Welding Ellipsoidal Head Pipe Cap heat treatment method
· Processing method of Seamless Steel Pipe Elbow


Location:HOME  »  NEWS
The technical requirements of pipe fittings
Source :本站   Time:3/10/2015 9:32:01 PM   hit:

  The following are the technical requirement or technical data of pipe fittings :

  Geometry size including outside diameter, inside diameter and wall thickness. Also require control curvature radius. Such as the length of the radius of 1.5 d, then the radius of curvature must be within the tolerance range of required. Because most of these pipe fittings are used for welding, in order to improve the welding quality, end car into groove, leave a certain Angle, with a certain edge, this one is more strict, how thick, Angle deviation range has a regulation, for how much and a lot more than pipe item geometry size. The same is the surface quality and mechanical properties of the basic and the pipe. For convenient welding, and thesame is the connected the pipe steel grade. Fourth, the all the pipes must be dealed with after surface treatment, the internal and external surface of iron oxide by shot blast spray drop, then coated with anticorrosive paint. This is both for export purpose, moreover, for the convenience of transportation, we have to prevent corrosion in domestic. Fifth, the requirement for the packaging, for a small fitting, such as export, you need to do the wooden case, about 1 cubic meters, the specified number of bend in this case about no more than a ton, the standard allows suit, namely large sets of small, but the total weight not more than 1 ton. For bulk will be a single package, like 24 “must be a single package.Another is the packing mark, mark is to indicate the size, steel grade, batch number, trademarks, manufacturer. Steel seal on fitting to play, and accompanied by the packing list and warranty document.

  Hebei holy day pipe group co., LTD. Co., is engaged in the production and service parts supply, we have the ability to produce all kinds of pipe fittings.Our main products are elbow, T-shirt, bend, reducer, cap, flange and socket.We've been in this line for about 20 years.Our products are exported to many countries and regions in southeast Asia, the Middle East, Europe and the United States.Our products enjoy good reputation both at home and abroad market.

         Previous :The product feature about carbon steel pipe fittings
               Next:Deflation alarm has sounded Chinese steel yet out of the woods
Friendly Links: carbon steel pipe fitting    steel shots    pipe fittings    carbon steel pipe fittings factory    Seamless Steel Pipe    steel pipe    valve    Butt welded elbow    shengtian pipe fitting    pipe fittings manufacturers    Butt weld pipe fitting    A234 wpb pipe fitting    steel seamless pip    accesorios de tubería    conexões    flanges    ANSI B16.9 weld neck flange     Фитинг    Screwed Fittings    steel flange    ERW pipes    manhole covers    steel grit    reeqlink   
Copyright ©Hebei Shengtian Pipe fittings Group Co.,Ltd.   
       Copyright ©Hebei Shengtian Pipe-fitting Group Co.,Ltd.     Email : sale@stpipefitting.cn 
 Add : Xiwang New District, Mengcun County,Hebei Province,ChinaSupport:boyikeji